Hi, my name's Kyle. I'm building my first rig, but after the initial out-of-the chassis startup, I'm not getting any beeps or splash screen. That is, I got a beep and splash screen on the first boot. I've tried removing everything out of the chassis again and stripping down to core components --Mobo, CPU, RAM and booting with and without the graphics card; removing and re-seating everything and removing any dust... The LEDs on the mobo and graphics card turn on, all my fans turn on; I can even hear the processors clicking, but I'm not getting any output through the speaker or my monitor.
My loadout:
Cooler Master eXtreme Power Plus 500w Power Supply (RS500-PCARD3-US)
ASUS M5A78L-M LX PLUS AM3+ AMD 760G Micro ATX AMD Motherboard
AMD Athlon II X3 455 Processor (ADX455WFGMBOX)
ASUS 2GB GDDR5 DIGI+ VRM technology Graphics Cards HD7770-2GD5
Corsair - CMZ8GX3M1A1600C10 - Vengeance 8GB 240-Pin DDR3 SDRAM DDR3 1600 Desktop Memory
Kingston Digital 60GB SSDNow V300 SATA 3 2.5 (7mm height) with Adapter Solid State Drive SV300S37A/60G
Western Digital Caviar Blue 500 GB SATA III 7200 RPM 16 MB Cache Bulk/OEM Desktop Hard Drive - WD5000AAKX
Xion Performance Meshed mATX USB 3.0 Tower Case XON-560_BK Black/Blue
My loadout:
Cooler Master eXtreme Power Plus 500w Power Supply (RS500-PCARD3-US)
ASUS M5A78L-M LX PLUS AM3+ AMD 760G Micro ATX AMD Motherboard
AMD Athlon II X3 455 Processor (ADX455WFGMBOX)
ASUS 2GB GDDR5 DIGI+ VRM technology Graphics Cards HD7770-2GD5
Corsair - CMZ8GX3M1A1600C10 - Vengeance 8GB 240-Pin DDR3 SDRAM DDR3 1600 Desktop Memory
Kingston Digital 60GB SSDNow V300 SATA 3 2.5 (7mm height) with Adapter Solid State Drive SV300S37A/60G
Western Digital Caviar Blue 500 GB SATA III 7200 RPM 16 MB Cache Bulk/OEM Desktop Hard Drive - WD5000AAKX
Xion Performance Meshed mATX USB 3.0 Tower Case XON-560_BK Black/Blue