Hello everyone!
For the past couple of weeks I've been trying to get my new customized pc to work but I keep running to problems.
1)When I turn it on, I can see the green light on my mobo and all the fans would run but after a short while (meaning like 10 seconds) it'll die.
2)I cannot get any signal onto my samsung monitor (it keeps telling me no signal) but then I took out 1 of the 2 RAMs and switched between the 4 available spots and only 1 of the spots will give me signal. For example, the spots are 1 2 3 4 and only the 3rd spot will give me signal but on the manual of the mobo it specifically told me to use spots 1 & 2. I have 2x2GB RAMs. Just to clarify, the RAMs I have say "MDD2" on it so I'm not sure if that even means anything.
3)I cannot get into BIOS because the pc keeps dying.
I don't know what to do anymore. I've checked online for many solutions but none of them worked so far. I don't use a CD-drive (because it's not necessary right?) Below are my specs for my PC, I'll provide links to them as well. Let me know if I missed anything that can help you guys solve my issue.
1) Mobo: ASUS P5N-D 750i SLI LGA775 Socket Intel Motherboard DDR2
2) PSU: OCZ OCZ600SXS StealthXStream 600W Power Supply with Four +12V rails, ATX, and 120mm Fan
3) Video Card: EVGA, E-Force 9800gtx
4) 500GB sata HDD
5) I use a DVI-HDMI to my monitor
6) CPU: Intel Core 2 Quad Processor 2.83 GHz 1333 MHz 6 MB LGA775 CPU Q9505BOX
7) Case: I don't know and does it matter?
Thanks and much appreciated.
For the past couple of weeks I've been trying to get my new customized pc to work but I keep running to problems.
1)When I turn it on, I can see the green light on my mobo and all the fans would run but after a short while (meaning like 10 seconds) it'll die.
2)I cannot get any signal onto my samsung monitor (it keeps telling me no signal) but then I took out 1 of the 2 RAMs and switched between the 4 available spots and only 1 of the spots will give me signal. For example, the spots are 1 2 3 4 and only the 3rd spot will give me signal but on the manual of the mobo it specifically told me to use spots 1 & 2. I have 2x2GB RAMs. Just to clarify, the RAMs I have say "MDD2" on it so I'm not sure if that even means anything.
3)I cannot get into BIOS because the pc keeps dying.
I don't know what to do anymore. I've checked online for many solutions but none of them worked so far. I don't use a CD-drive (because it's not necessary right?) Below are my specs for my PC, I'll provide links to them as well. Let me know if I missed anything that can help you guys solve my issue.
1) Mobo: ASUS P5N-D 750i SLI LGA775 Socket Intel Motherboard DDR2
2) PSU: OCZ OCZ600SXS StealthXStream 600W Power Supply with Four +12V rails, ATX, and 120mm Fan
3) Video Card: EVGA, E-Force 9800gtx
4) 500GB sata HDD
5) I use a DVI-HDMI to my monitor
6) CPU: Intel Core 2 Quad Processor 2.83 GHz 1333 MHz 6 MB LGA775 CPU Q9505BOX
7) Case: I don't know and does it matter?
Thanks and much appreciated.