Put together a rig but this time I attempted to reuse some pars from my previous rig as they were still worthwhile. I re-used 2x4GB DDR3 and my 2 Hard Drives. Purchased new: AMD Zambezi Processor, ASUS Sabertooth 990FX mobo, and GeForce Graphics card all of which were compatible according to specs. After putting it together and pushing the power switch I get all the fans starting up the LED's all light up, but there is no video feed nor does BIOS boot as far as I can tell. I can not turn off the computer with the power switch either, I have had to turn it off via the power supply. I'm not sure if the hardware I re-used is the issue maybe because the hard drives are still partitioned or if maybe the issue could be how I've put in the RAM or other hardware maybe even if I've plugged some of the cords in incorrectly. Although I have tried troubleshooting by moving the RAM around a bit and moving the slots I've plugged the hard drives into, I've seen no improvement. I'm not that great with all of this and my friend who assists me is stumped as well. Was hoping for some insight, sorry if I wasn't detailed enough. :banghead:
↧